[Free] 2018(May) EnsurePass Testking Microsoft 70-642 Dumps with VCE and PDF 191-200

Ensurepass.com : Ensure you pass the IT Exams
2018 May Microsoft Official New Released 70-642
100% Free Download! 100% Pass Guaranteed!

TS: Windows Server 2008 Network Infrastructure, Configuring

Question No: 191 – (Topic 2)

Your network contains a server named Server1 that runs Windows Server 2008 R2. You need to identify which processes perform the most disk writes and disk reads per second.

Which tool should you use?

  1. Disk Management

  2. Reliability Monitor

  3. Resource Monitor

  4. Storage Explorer

Answer: C

Question No: 192 – (Topic 2)

Your network contains an Active Directory domain. The domain contains two servers named Server1 and

Server2. All servers run Windows Server 2008 R2 and have Windows Firewall turned on.

You need to ensure that you can use Event Viewer on Server2 to access the Application log on Server1.

What should you do?

  1. On Server2, create a new event subscription.

  2. On Server2, modify the outbound firewall rules.

  3. On Server1, modify the inbound firewall rules.

  4. On Server1, modify the settings on the Application log.

Answer: C

Question No: 193 – (Topic 2)

Your network contains a server named Server1.contoso.com. Server1 is located on the internal network.

You have a client computer named Computer1 that runs Windows 7. Computer1 is located on a public network that is connected to the Internet. Computer1 is enabled for DirectAccess.

You need to verify whether Computer1 can resolve Server1 by using DirectAccess. Which command should you run on Computer1?

  1. nbtstat.exe -a server1.contoso.com

  2. netsh.exe dnsclient show state

  3. nslookup.exe server1.contoso.com

  4. ping.exe server1.contoso.com

Answer: D

Question No: 194 – (Topic 2)

Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 is located in a branch office. You discover that users cannot obtain cached documents from Server1.

The BranchCache configuration on Server1 is shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to ensure that Server1 hosts cached content for client computers in the branch office.

What should you do?

  1. Enable Peer Discovery firewall rules.

  2. Set the Startup Type of the BranchCache service to Automatic, and then start the service.

  3. At the command prompt, run netsh.exe branchcache set service mode=DISTRIBUTED.

  4. At the command prompt, run netsh.exe branchcache set service mode=HOSTEDCLIENT.

Answer: B

Question No: 195 – (Topic 2)

Your network contains a Network Policy Server (NPS) named Server1. NPS1 provides authentication for all of the VPN servers on the network.

You need to track the usage information of all VPN connections. Which RADIUS attribute should you log?

  1. Acct-Session-Id

  2. Acct-Status-Type

  3. Class

  4. NAS-Identifier

Answer: C

Question No: 196 – (Topic 2)

Your network contains two Active Directory sites named Site1 and Site2. Site1 contains a server named

Server1. Server1 runs a custom application named App1.

Users in Site2 report that they cannot access App1 on Server1. Users in Site1 can access App1. Server1 has a Windows Firewall with Advanced Security rule named Rule1.

You discover that Rule1 blocks the connection to App1. You verify that Server1 has no connection security rules.

You need to ensure that the Site2 users can connect to Server1.

What should you modify in Rule1?

  1. the authorized computers list

  2. the authorized users list

  3. the edge traversal settings

  4. the scope

Answer: D

Question No: 197 – (Topic 2)

Your network contains a Network Policy Server (NPS) named NPS1. You deploy a new NPS named NPS2.

You need to ensure that NPS2 sends all authentication requests to NPS1.

What should you modify on NPS2?

  1. health policies

  2. network policies

  3. RADIUS clients

  4. remote RADIUS server groups

Answer: D Explanation:

NPS is RADIUS (Remote Authentication….). We need to configure NPS2 to use NPS1 for authentication.

Question No: 198 – (Topic 2)

Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the File

Services role installed.

You configure a file classification rule.

You discover that scanned documents stored as JPG files are not being classified. You need to ensure that all file classification rules apply to scanned documents.

What should you do?

  1. Enable the Windows TIFF IFilter feature.

  2. Modify the properties of the file classification rule.

  3. Modify the properties of the Windows Search Service.

  4. Install the Office 2007 System Converter: Microsoft Filter Pack.

Answer: A Explanation:

1- Not classified as a matter of operation to the file. As soon the file quot;steps onto the groundquot;

  • I mean being copied to NTFS File system if there is a classification rule/pattern that match file strings it will apply;

    1. – If there is a classification rule for a quot;JPGquot; file format at all – it will classify the scanned JPGs,

    2. – This might be our winner!! =)) The word quot;documentquot;

    A) Enable the Windows TIFF IFilter feature. Cheers! =)

    In order FCI /File Classification Infrastructure/ to classify images based on their content by using optical character recognition (OCR), you need to install Windows TIFF IFilter on the server that is running FCI. Then the content classifier can recognize TIFF images and extract text from those files TIFF IFilter supports the most frequent compressions, such as LZW, JPG, CCITT v4, CCITT v6, uncompressed, and so forth.

    quot;You discover that scanned documents stored as JPG files are not being classified. You need to ensure that all file classification rules apply to scanned documents.quot; So, we have quot;Folderquot;and quot;Contentquot; classifiers types. =Folder Classifier:

  • This rule uses the Folder Classifier which assigns the specified value to the classification property for all files within the rule#39;s scope /within the target folder/.

    Which means that this mechanism does not quot;carequot; for a file type or whatever is the operation that created the file in the set for classification folder… as soon the file is in the folder – it will be classified. 😉

    =Content Clasifier:

  • Searches for text or patterns using the same mechanism as the search indexer and if it finds them assigns the specified value to the classification property. When parameters are found in a file, then the rule will assign the property value /Example : If a word/string quot;Confidentialquot; is set in the rule and there is a file containing that word

  • file will be classified./

    So we have tree quot;magic wordsquot; mentioned as a factors for the not-classified files in the quot;Questionquot; :

    1. File is scanned to the server

    2. File type is JPG

    3. File subject – contains document

      Question No: 199 – (Topic 2)

      Your network contains an Active Directory domain. All client computers run Windows XP Service Pack 3 (SP3).

      The domain contains a member server named Server1 that runs Windows Server 2008 R2.

      On Server1, you create a connection security rule that requires authentication for inbound and outbound connections. You configure the connection security rule to use Kerberos authentication.

      You need to ensure that the client computers can connect to Server1. The solution must ensure that all connections to Server1 are encrypted.

      What should you do?

      1. From the Windows Firewall with Advanced Security console, create an inbound rule on Server1.

      2. From the Windows Firewall with Advanced Security console, create an outbound rule on Server1.

      3. From a Group Policy object (GPO), enable the Client (Respond Only) IPSec policy on all client computers.

      4. From a Group Policy object (GPO), configure the Network Security: LDAP client signing requirements policy setting for all client computers.

    Answer: C Explanation:

    Client (Respond Only) – This default policy contains one rule, the default response rule. The default response rule secures communication only upon request by another computer. This policy does not attempt to negotiate security for any other traffic. http://technet.microsoft.com/en-us/library/cc786870(v=ws.10).aspx

    Question No: 200 – (Topic 2)

    Your network contains a DNS server named DNS1 that runs Windows Server 2008 R2.

    You need to ensure that DNS1 only responds to DNS queries from computers that are located in the same subnet.

    What should you configure?

    1. Interfaces from DNS Manager

    2. Security from DNS Manager

    3. Trust Anchors

    4. Windows Firewall

    Answer: A Explanation:

    Ensurepass 2018 PDF and VCE

    http://technet.microsoft.com/en-us/library/cc740071(WS.10).aspx

    Topic 3, Volume C

    100% Ensurepass Free Download!
    Download Free Demo:70-642 Demo PDF
    100% Ensurepass Free Guaranteed!
    Download 2018 EnsurePass 70-642 Full Exam PDF and VCE

    EnsurePass ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

  • Leave a Reply

    Your email address will not be published. Required fields are marked *