TS: Windows 7, Configuring
Question No: 211 – (Topic 3)
You work as a desktop support technician at Abc.com. The Abc.com network consists of a single Active Directory domain named Abc.com. You are responsible for maintaining Abc.com#39;s Windows 7 workstations.
You want to configure all Windows 7 workstations to produce a new Security ID (SID) as well as a Welcome screen when the workstation is booted.
What should you do?
You should consider running Msconfig.exe /oobe /generalize startup on all Windows 7 workstations.
You should consider running Sysprep.exe /audit /generalize on all Windows 7 workstations.
You should consider running bootcfg.exe on all Windows 7 workstations.
You should consider running Sysprep.exe /oobe /generalize on all Windows 7 workstations.
Question No: 212 – (Topic 3)
You have a computer that runs Windows XP Service Pack 3 (SP3). The computer is a member of an Active Directory domain. Several domain users log on to the computer.
You plan to install Windows 7 on the computer.
You need to ensure that all user settings are preserved after the installation. What should you do?
Run Loadstate.exe, install Windows 7, and then run Scanstate.exe.
Run Sysprep.exe /audit, install Windows 7, and then run Sysprep.exe /oobe.
Run Windows Easy Transfer, install Windows 7, and then run Windows Easy Transfer again.
Create a backup of %systemdrive%\documents and settings, install Windows 7, and then restore the backup.
Answer: C Explanation:
Windows Easy Transfer
Windows Easy Transfer is a utility that comes with Windows 7 that you can use to transfer user profile data from computers running Windows XP, Windows Vista, or Windows 7 to new computers running Windows 7. Windows Easy Transfer can be used to transfer user accounts, documents, music, pictures, e-mail, bookmarks, certificates, and other data.
External Hard Disk or USB Flash Drive You can specify an attached external hard disk or USB flash drive. It is also possible to specify an internal hard disk drive or network share when using this method. You can perform a side-by-side migration as well as a wipe-and- restore migration using this method. You protect your data by entering a password on the source computer that you must again enter before importing the data on the destination computer.
Question No: 213 – (Topic 3)
You need to create a VPN connection. What should you do?
From Windows Explorer, right-click Computer and then click Map network drive.
From Windows Explorer, right-click Computer and then click Add a network location.
From Network and Sharing Center, click Set up a new connection or network and then click Set up a new network.
From Network and Sharing Center, click Set up a new connection or network and then click Connect to a workplace.
Answer: D Explanation:
Virtual Private Networks
When you create a VPN connection, you need to specify the address of the VPN server that you are connecting to and your authentication credentials. You can create a new VPN connection in the Network And Sharing Center by clicking Set Up A New Connection Or Network and then Connect to a Workplace. When you create a new VPN connection, Windows 7 sets the VPN type to Automatic. You can configure a connection to use a specific VPN protocol, but if you do this, Windows 7 does not try to use other VPN protocols if the protocol you select is not available.
Question No: 214 – (Topic 3)
You have a computer that runs Windows 7. You generate a System Diagnostic Report and receive the following warning message: The Graphics rating for the system is poor and may be the cause of performance problems.
You need to increase the graphics performance of the computer without modifying the current hardware or drivers.
What should you do?
From Personalization, modify the screen saver.
From Indexing Options, modify the Advanced options.
From Performance Options, modify the visual effects.
From Performance Options, modify the processor scheduling.
Explanation: Configuring Performance Options
The Performance Options tool is a Windows 7 Performance And Analysis tool that you can access by clicking Advanced Tools on the Performance Information And Tools dialog box and then clicking Adjust The Appearance And Performance Of Windows. You can let Windows decide what is best for your computer, adjust for best appearance, adjust for best performance, or select Custom and specify the appearance settings for your computer manually. If you select Custom, you can choose which visual effects to turn off, one by one. There are 18 visual effects that you can control, such as whether shadows are displayed under screen icons or under the mouse pointer. On the Advanced tab, you can adjust for the best performance of programs or background services. If your computer is running applications (as a typical workstation does), you would specify Adjust For Best Performance Of Programs. On a server that is functioning as a Web server (for example), you would specify Adjust For Best Performance Of Background Services.
Question No: 215 – (Topic 3)
Your office contains the wireless networks shown the following table.
You have a portable computer that runs Windows 7. The computer successfully connects to all of the wireless networks.
You discover that when you start the computer, it connects to Network2. You need to ensure that the computer connects to Network3 by default.
What should you do?
From Network and Sharing Center, modify the Advanced sharing settings.
From Network and Sharing Center, modify the Manage Wireless Networks settings.
From Network Connections, modify the properties of the wireless network adapter.
From Network Connections, modify the bindings of the wireless network adapter.
Answer: B Explanation:
Managing Preferred Wireless Networks
If you have a wireless-enabled mobile computer such as a laptop, you can take it to various locations and connect to whatever wireless networks are available at any location. You can see the available networks by opening Network And Sharing Center and clicking Connect To A Network. You can also click the Wireless icon on the Toolbar at the bottom right section of your screen. You can then right-click a network and click Connect. Available networks are listed in the Manage Wireless Networks dialog box. If you have previously connected to various wireless networks, the list of these networks is referred to as your preferred list. The wireless networks on your preferred list are your preferred wireless networks. You can click Manage Wireless Networks in the Network And Sharing Center and view saved wireless networks. You can change the order in which your computer attempts to connect to preferred networks by dragging the networks up or down in the list. You can also change preferences for the network by right-clicking the network and selecting Properties.
Question No: 216 – (Topic 3)
You have a computer that runs Windows 7. The computer has a single volume. You install 15 applications and customize the environment.
You complete the following actions:
->Create an export by using Windows Easy Transfer
->Create a system image by using Backup and Restore
->Install the User State Migration Tool (USMT) and run Scanstate
The disk on the computer fails. You replace the disk.
You need to restore the environment to the previous state. What should you do?
Install Windows 7, install USMT, and then run Loadstate.
Install Windows 7 and then import the Windows Easy Transfer package.
Start the computer from a Windows Recovery Environment (Windows RE) disk and then run Bcdboot.exe.
Start the computer from a Windows Recovery Environment (Windows RE) disk and then restore the system image.
Answer: D Explanation:
Restoring from a System Image Backup
A System Image restore rewrites the entire contents of a system volume. Therefore, you restore from a System Image backup by booting from the Windows 7 Installation DVD- ROM and loading System Recovery tools or by pressing F8 during the boot process.
Restoring from a System Image backup enables you to quickly get a computer running after you replace a failed hard disk, or if the operating system installation has been corrupted (for example, by malware that cannot be removed except 0 by wiping the disk). It is sometimes known as complete recovery or complete PC Restore. This procedure assumes that the System Recovery Options (otherwise known as the Windows Recovery Environment, or Windows RE) files are present on the DVD-ROM. If not, you can boot from the installation DVD-ROM and press F8 during the boot to access the Advanced Boot Options, as described in the next section of this lesson. To restore a System Image backup, perform the following steps:
Ensure the backup medium is connected to your computer.2. Insert the Windows 7 DVD- ROM. Ensure that the computer BIOS is configured to boot from the DVD-ROM.3. Restart your computer. When prompted to boot from DVD-ROM, press any key.4. Windows 7 Setup loads. When prompted, select your regional preferences and then click Next.5. Click
Repair Your Computer.6. In the System Recovery Options dialog box, click Restore Your Computer Using System Image. If thebackup was saved to a DVD-ROM, insert the DVD- ROM now. Click Next. The Windows System Image Restore Wizard starts.7. On the Select A System Image Backup page, the most recent backup is automatically selected. If this is the backup you want to restore, click Next. Otherwise, click Select A System Image, click Next, and then select the desired backup.8. On the Choose Additional Restore Options page, select the Format And Repartition Disks check box if you want to reformat the disk and overwrite all data, or if the disk is not formatted. If you do not want to overwrite all the data on your current disk, do not select this check box. Click Next.9. Click Finish. When prompted, click Yes to confirm. Windows System Image Restore reads the data from the backup and overwrites existing files. You can restore to a different-sized hard disk, provided that the hard disk is large enough to store the backup. After the restore is complete, the computer restarts using the restored system volume.
Question No: 217 – (Topic 3)
You plan to install Windows 7 on a new notebook computer.
The computer will be used by users who speak English, French, and German.
You need to select an edition of Windows 7 that enables the users to switch between different graphical user interface (GUI) languages. The solution must minimize costs.
Which edition should you choose?
Question No: 218 – (Topic 3)
You have a computer that is certified for Windows 7.
You need to install Windows 7 on the computer. The installation method must prevent you from being prompted for information during the installation.
What should you do?
Create an unattend.txt file on a removable drive. Start the computer from the Windows 7 installation media.
Create an autounattend.xml file on a removable drive. Start the computer from the Windows 7 installation media.
Start the computer from the Windows 7 installation media. At the command prompt, run Setup.exe and specify the /m parameter.
Start the computer from the Windows 7 installation media. At the command prompt, run Setup.exe and specify the /tempdrive.
Explanation: Copy the Autounattend.xml file to the root directory of a removable storage device (such as a UFD). You now have a basic answer file that automates Windows Setup. Turn on the reference computer. Insert the Windows 7 product DVD and the UFD containing the answer file (Autounattend.xml) that you created. Windows Setup (Setup.exe) starts automatically and searches the root directory of all removable media for an answer file called Autounattend.xml
Note: that the use of an answer file is optional, although it is the method Microsoft recommends. (And it was specified in the question).
Question No: 219 – (Topic 3)
You need to create a virtual hard disk (VHD) file that will be used to deploy Windows 7. The solution must minimize the performance impact caused by using a VHD.
Which type of VHD should you create?
dynamically expanding disk
Explanation: Typically, you place the VHD on a second internal or external hard disk (although this is not essential). You then specify the VHD size and format settings.
Microsoft recommends the default Fixed Size setting, but you can select Dynamic Expanding if you do not want to allocate the disk space. Fixed Size gives better performance and is more suitable in a production environment.
Question No: 220 – (Topic 3)
You have two computers named Computer1 and Computer2 that run Windows 7. You use Remote Desktop to connect from Computer1 to Computer2.
You need to prevent the desktop background of Computer2 from being displayed when you use Remote Desktop to connect to Computer2.
What should you do on Computer1?
From the Personalization options, change the theme.
From the System properties, modify the Remote settings.
From the Remote Desktop Connection options, modify the Performance setting.
From the Remote Desktop Connection options, modify the Display configuration settings.
Answer: C Explanation:
Configuring the Desktop ExperienceYou can configure the connection speed and fine-tune the desktop environment for optimal performance by using the settings located on the Experience tab of the Remote Desktop Connection tool. Most of these settings relate to the graphical nature of the desktop. Because the processing for graphics happens on the server and must be transmitted to the desktop over the network connection, you can increase performance by allowing only the minimal settings that are necessary for your users. When you choose a connection speed, the check boxes are automatically selected to indicate the recommended settings for the richest visual experience possible at that speed.ExperienceConfigure the connection speed and adjust the desktop environment for optimal performance.Desktop background Allows user to choose a custom background or wallpaper for their desktop. Because these can be very graphicintensive, disable this setting unless it is necessary for your users.
100% Ensurepass Free Download!
–Download Free Demo:70-680 Demo PDF
100% Ensurepass Free Guaranteed!
–Download 2018 EnsurePass 70-680 Full Exam PDF and VCE
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|